AIRUL SHARIZLI ABDULLAH
Microcontroller Application, Electronics System and Instrumentation, Wireless Monitoring System.
Faculty of Electrical and Electronics Engineering
Universiti Malaysia Pahang,
26600, Pekan, Pahang, Malaysia
Airul Sharizli, Rahizar Ramli, Mohamed Rehan Karim & Ahmad Saifizul Abdullah. 2014. Simulation and analysis on the effect of gross vehicle weight on braking distance of heavy vehicle. Applied Mechanics and Materials, 564: 77-82. (ISI/SCOPUS Cited Publication)
Karim M.R., Saifizul A., Yamanaka H., Sharizli A., Ramli R. (2014) An Investigation on Safety Performance Assessment of Close-Following Behavior of Heavy Vehicle using Empirical-Simulation Technique. Journal of Transportation Technologies, Scientific Research Publishing, Vol. 4 No. 1, 2014, pp. 22-30. 2014.1.
Karim M.R., Saifizul A., Yamanaka H., Sharizli A., Ramli R. (2013), Degree of Vehicle Overloading and its Implication on Road Safety in Developing Countries. Journal of Civil and Environmental Research, IISTE, Vol.3, No.12, pp. 20-31, 2013.
Karim M.R., Saifizul A., Yamanaka H., Sharizli A., Ramli R. (2013) Minimum Safe Time Gap (MSTG) as a new Safety Indicator incorporating Vehicle and Driver Factors. Journal of Eastern Asia Society for Transportation Studies, EASTS, Vol.10, pp.2069-2079, 2013.12.
Karim M.R., Saifizul A., Yamanaka H., Sharizli A., Ramli R. (2013) Minimum Safe Time Gap (MSTG) as a new Safety Indicator incorporating Vehicle and Driver Factors. Proceedings of Eastern Asia Society for Transportation Studies, EASTS, Vol.9, 2013, p407. (http://easts.info/on-line/proceedings/vol9/index.html)
A.A. Sharizli, F.A. Zabir, N.A Abu Osman, Z. Radzi and A.A. Shaifizul. “Preliminary Design of an Automated Rapid Maxillary Expander for Dento-Facial Application”, Journal of Biomechanics, Vol 40 (S2): pp 459, 2007. (Q1 ISI-Cited Publication)
Conference (Proceedings) 2011~latest
Airul Sharizli, Rahizar Ramli, Mohamed Rehan Karim, Ahmad Saifizul and Hideo Yamanaka Developing a braking distance GUI calculator for heavy vehicle using multi-body dynamics simulation software. International Conference on Design and Concurrent Engineering (iDECON2015) September 6 – 7, 2015, AWA KANKO HOTEL, Tokushima, JAPAN.
M.R.Karim A.A.Saifizul, R.Ramli & A.Sharizli , AN ASSESSMENT ON SAFETY PERFORMANCE OF CAR FOLLOWING BEHAVIOR ON TWO-LANE ROAD. International Conference on “Innovative Trends in Multidisciplinary Academic Research” (ITMAR-October 20-21, 2014) at Istanbul, Turkey.
M.R.Karim, A.A.Saifizul, R.Ramli, A.Sharizli. Truck overloading and its implication on safety along road curves. International Conference on “Innovative Trends in Multidisciplinary Academic Research” (ITMAR-October 20-21, 2014) at Istanbul, Turkey.
A. A. Sharizli, R.Rahizar, M.R.Karim,A.A.Saifizul. “Simulation and Analysis on the Effect of Gross Vehicle Weight on Braking Distance of Heavy Vehicle”, International Conference on Advances inMechanical and Manufacturing Engineering (ICAM2E), 26 – 28 November 2013, Hotel Istana, Kuala Lumpur, Malaysia.
A. A. Sharizli, R.Rahizar, M.R.Karim,A.A.Saifizul, “Novel Method of Determining Braking Distance of Heavy Vehicle using Advanced Simulation Technique”, 3rd International Conference on Civil, Transport and Environment Engineering (ICCTEE'2013), Dec. 25-26, 2013, Bangkok, Thailand.
A.A.Sharizli, Mfalfadly. “PC based Kenwood TS-570D Transceiver Controller”. 1st International Conference on Electrical, Control and Computer Engineering 2011, 21-22 June 2011, Pahang Malaysia.
A.A.Sharizli, O.Aliman, Mfalfadly. “Design a low cost microcontroller-based pH and temperature data logging system” World Academy of Science, Engineering and Technology, 18-20 December 2010, Singapore.
A.A.Sharizli, R.Ishak. “Microcontroller-based pH and Temperature Data Logging System for water quality monitoring.” Proceeding for 2010 3rd International Conference on Enviromental and Computer Science, 18 -19 October 2010, Kunming China.
A. A. Sharizli, N. A. Abu Osman and A. A. Abdullah, “Force Analysis of an Automated Rapid Maxillary Expansion (ARME) Appliance”, Proceedings of World Academy of Science, Engineering and Technology 59, 2009, Bali, Indonesia.
F.A. Zabir, A.S. Abdullah, N.A. Abu Osman, Z. Radzi, N.A. Yahya, N.H. Abu Kasim. “Acquiring Anatomical Representation of Human Maxilla for Rapid Maxillary Expansion”. Proceeding for 4th International Conference On Biomedical Engineering, 25-28 June 2008, Kuala Lumpur. Springer 2008,ISBN: 978-3-540-69138-9.
A.A.Sharizli,N.A.Abu Osman,A.A.Saifizul.”ARME Appliance: The new design of Rapid Maxillary Expansion Appliance”,Proceeding for International Conference on Man-Machine Systems ICoMMS 2009, 11-13 October 2009, Bayview Beach Resort, Penang Malaysia
F.A. Zabir, A.S. Abdullah, N.A. Abu Osman, Z. Radzi, N.A. Yahya, N.H. Abu Kasim “Finite Element Analysis of An Automated Rapid Maxillary Expander (ARME)”. Proceeding for 4th International Conference On Biomedical Engineering,25-28 June 2008, Kuala Lumpur. Springer 2008,ISBN: 978-3-540-69138-9.
N.A.Abu Osman, Z.Radzi, F.A Zabir, A.S.Abdullah,N.H.Abu Kasim,N.A.Yahya. “Maxillary Expansion by An Automated Assembly”, International Conference on Engineering, Applied Science and Technology 2007, 21-23 November 2007, SwisHotel Le Concorde, Bangkok Thailand.
A.A.Saifizul,A.F.Sharifuddin,A.A.Sharizli,”A Real Time lane detection for vision based Automatic Steering Control System”, 16th IEEE Conference on Control Applications (CCA), 2007, Singapore
A. A. Sharizli, N. A. Abu Osman, Z. Radzi, N. A. Yahya and A. A. Saifizul, “Design of an automated Rapid Maxillary Expansion appliance: A preliminary study”, IFMBE Proceedings International Conference on Biomedical Engineering, 2006, ISBN: 3540680160. (ISI-Cited Publication)